Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

uxcell Manguera de tubo de PTFE de alta temperatura, aislante, manguera de impresora 3D, 0,8 mm de diámetro interior x 1,6 mm de diámetro exterior x 5 pies, color blanco

Envío gratis en pedidos superiores a $600MXN

$344MXN

$ 165 MXN $165MXN

En stock

1.:0.8mmx1.6mm


2.Color:Blanco


3.Capacidad:2 Tb


Acerca de este artículo

  • Presentamos el SSD WD_BLACK SN770M, el primer SSD M.2 2230 NVMe construido a partir de una marca de confianza de los jugadores.
  • Dispositivos portátiles compatibles con Supercharge como ASUS ROG Ally y Valve Steam Deck con velocidades de hasta 5.150 MB/s[2] (modelos de 1 TB y 2 TB) para instalaciones de juego increíblemente rápidas y cargas de nivel.
  • Juega a más juegos, juegos más grandes dondequiera que estés con hasta 2 TB de almacenamiento Western Digital TLC 3D NAND de confianza.
  • Revitalice y amplíe el almacenamiento de su portátil compatible con SSD M.2 2230, como muchos modelos de Microsoft Surface y Dell.
  • Con el respaldo de la garantía limitada de 5 años de Western Digital, mantenga su unidad optimizada con el software Western Digital Dashboard (solo Windows).


Amplíe su dispositivo de juego de mano o el almacenamiento de portátil compatible con M.2 2230 con un SSD NVMe WD_BLACK SN770M con hasta 2 TB[2] de almacenamiento. Lleva tu gran biblioteca de juegos dondequiera que estés y sumérgete con instalaciones de juego increíblemente rápidas y cargas de nivel.


Oscar omar posada sanchez
7 de agosto de 2025
El material de construcción es excelente, la apariencia y materiales están OK, su velocidad de Escritura y lectura como lo indica la caja de producto es rápido.
Jorge Andrés Moreno Martínez
7 de julio de 2025
Esta super rápido, ya había comprado un Western Digital para la Play, como nunca a fallado y esta muy bien por eso me decidí por este para la Ally.En comparación con otras marcas es un poco más caro pero vale la pena, si lo recomiendo.
Ricardo Castro
27 de junio de 2025
Llego un dia antes y estoy muy feliz por actualizar mi almacenamiento.Muy buena inversión, lo probé con una asus rog flow z13, para las personas que tienen dudas,es la mejor opción.
Offspace
15 de junio de 2025
Hace un año quise instalar en una Asus Rog Z13 con Intel i7 y fue imposible debido a que causó demasiados fallos de pantalla azul, además que el instalador de Windows no puede ver el disco, por lo que es indispensable buscar los drivers adecuados en ese proceso.Luego de ello lo tuve instalado en una Rog Ally, con Ryzen Z1 donde funcionó sin un solo problema serio, salvo que causó excesivo calor y consumo energético.Recién lanzaron una actualización de firmware para los discos WD donde se elimina el BSOD ó pantalla azul. Sí, estoy escribiendo la reseña desde la Z13, llenando el disco de juegos y programas y a diferencia de hace casi un año llevo casi 24 horas sin pantallazo azul, pero claro es una prueba que quise hacer con el nuevo firmware porque el objetivo fue instalarlo aquí y no en la Ally.
Miguel Ángel
13 de junio de 2025
No lo recomiendo para asus rog ally z1 es demasiado inestable evítense la pena de pasar por pantallazos azules
Todolf in the Bunker
22 de mayo de 2025
Top Speed allerdings für die Ally als externe Festplatte bissi zu schnell ^.^
AHMAD
8 de mayo de 2025
انصح به اخد إلى جهازي rog ally
Xueyang
6 de mayo de 2025
I upgraded my Steam Deck with the WD_BLACK SN770M 2TB and wow—what a difference! If you’re tired of juggling game installs or waiting on slow load screens, this drive is 100% worth it.Installation was super easy—it’s the exact 2230 size the Steam Deck needs, so no adapters or awkward fitting required. Just popped it in, reinstalled SteamOS, and I was good to go. The Steam Deck recognized it right away.The 2TB storage is a game-changer. I’ve loaded up my entire library and still have room left. No more deleting games to make space! Plus, it’s crazy fast. Load times are significantly shorter and navigating through menus feels way snappier.Also worth noting—this SSD runs cool and quiet, even during longer gaming sessions. That’s huge for a handheld device.✅ Pros:Perfect size for Steam Deck (2230 form factor)Super fast (up to 5,150MB/s)Massive 2TB storage—say goodbye to space issuesReliable performance and runs coolEasy to install, even if you're not super techy❌ Cons:Doesn’t come with a heatsink (though not really needed for Steam Deck)On the pricey side—but you get what you pay forIf you're serious about getting the most out of your Steam Deck, this SSD upgrade is a no-brainer. I’d do it again in a heartbeat!
Customer
4 de mayo de 2025
First one was a no show. This was the replacement and it works well.
Samm
19 de abril de 2025
I was skeptical of the performance of this SSD, since I typically only buy the best, and have now multiple SN850x, so this sn770 felt like a downgrade. But it turned out to be the fast 2230 drive I have ever tested, and it has really good thermals. I'm running most of my games directly off it.It's very reliable , has unmatched value for money, and it comes with bunch of tools for speed testing.Installation was peice of cake, especially after using the automated SSD cloner.Overall, if you are able to use 2280 instead, then use those. If you must use 2230, then this SN770 is by far the best. It's massive upgrade over my previous sabrent ssd.If your device (like my GPD Win Max 2 2023) has only two slots, one is 2280, and other 2230, and you want the best, then for sure this sn770 2TB for the small 2230 slot, and pair it with 2TB SN850x or 990 PRO in bigger 2280 slot.
Heather M.
4 de marzo de 2025
Would buy again
Gary B.
3 de febrero de 2025
Good for my 3D printer and correct size ID and OD. Can see the filament inside to gauge placement. Much easier than shining a light through the tubing to see if filament is in that section.
Thinh Nguyen
12 de enero de 2025
Lot of reviews saying this is not good for 3d printing.I purchased this since I needed longer PTFE tubes than I can buy from Bambu Lab.I use this for my all of my Bambu Lab printers, and it works just fine. No issues with stuck filament or breakage inside of the tube.I think translucent looks better and also helps in diagnosing issue caused by filament as you can see the filament better than white ptfe.It does come wound up pretty tight, but almost all ptfe tubes from amazon come wound up pretty tight. You'll want to straighten the tube before connecting it to the printer.
Stan Aksentsev
11 de enero de 2025
This charred and dripped when a flame was applied. PTFE does not do this.
Robert Wright
7 de enero de 2025
FYI - I ordered six of these clear PTFE tubes. My 3D printer (Bambu Lab X1C) is very sensitive to the friction of the filament going through the PTFE tubes so I ordered these tubes .5 mm larger than what came with the printer. Four of them worked great but two of the six were unusable because the tube was severely "kinked" when it arrived. The kinked spot caused extra friction, thus they were not usable for my purposes.